Reelcraft’s Series 30000 hose reels are designed for rugged, heavy duty applications requiring long lengths of hose and large storage capacity.

• All-bolted unitized construction with no welds to fatigue, full flow swivel and heavy gauge steel frame, spool.
• Full flow, stress-free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life.
• Quality finish and corrosion resistant – Individually powder coated components offer the maximum protection from premature corrosion.
• Hose I.D.: 3/4″, 1/2″, 1″
• Longest hose lengths up to 250ft.

Reelcraft enclosed reels are durable and compact for a wide range of applications with critical space requirements. A full flow shaft and swivel assures maximum product delivery.

• Extra protection – Reels feature a steel enclosure that offers an additional level of protection for the hose from potentially harmful foreign debris. These reels are designed such that removing the cover on either side will allow access to the majority of serviceable parts.
• Full flow stress free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life. The hose is plumbed into the base to eliminate the risk of undue stress on the swivel.
• Long life drive spring – Declutching arbor virtually eliminates possibility of spring damage due to reverse winding. Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
• Quiet speed latch – The latch cam is designed for reliable quiet operation.
• Hose I.D.: 3/8″, 1/4″, 1/2″
• Longest hose lengths: Up to 75ft

Engineered for use in highly corrosive environments such as restaurants, institutions, and home and garden applications. Reelcraft’s pre-rinse reels include a standard lever-operated spray valve. Available in stainless or powder-coat finish.

• Reinforced steel – The robotically welded steel base offers maximum strength and consistent quality. All steel components are powder coated for maximum corrosion resistance.
• Full flow stress free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life. The hose is plumbed into the base to eliminate the risk of undue stress on the swivel.
• Long life drive spring – Declutching arbor virtually eliminates possibility of spring damage due to reverse winding. Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
• Quiet speed latch – The latch cam is designed for reliable quiet operation.
• Hose I.D.: 3/8″, 1/2″
• Longest hose lengths up to: 35ft

Reelcraft’s spring retractable fuel delivery reels, equipped with Viton seals, incorporate metal forms to insure the greatest possible strength and are ideal for mobile and permanent-mount applications. These rugged, corrosion-resistant reels are suitable for a wide variety of fuel applications including E85. Series FD9000 reels are supplied with our ball-bearing style swivel.

• Substantial base frame – The full width frame has the greatest amount of mounting area and overall strength of reels within its class.
• Full flow stress free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life.
• Long life drive spring – Declutching arbor virtually eliminates possibility of spring damage due to reverse winding. Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
• Quality finish and corrosion resistant – Individually powder coated components offer the maximum protection from premature corrosion.
• Hose I.D.: 1/2″, 3/4″, 1″, 1.25″,  1.5″
• Longest hose lengths up to: 100ft

Reelcraft’s Series 30000 hose reels are designed for rugged, heavy duty applications requiring long lengths of hose and large storage capacity. All-bolted unitized construction with no welds to fatigue, full flow swivel and heavy gauge steel frame, spool and drum ensure longest service life. Series 30000’s vibration-proof, self-locking fasteners are ideal for industrial or field use such as turf care or pest control.

• Hose replacement made easy – the goose neck can easily be removed to simplify adding long lengths of hose to the reel.
• Full flow stress free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life.
• Quality finish and corrosion resistant – Individually powder coated components offer the maximum protection from premature corrosion.
• Motor options – Multiple motor options provide an easy method to rewind long lengths of hose.
• Hose I.D.: 1/4″, 3/8″, 1/2″,  3/4″, 1″
• Hose length: Up to 1000ft

Reelcraft’s Series 30000 hose reels are designed for rugged, heavy duty applications requiring long lengths of hose and large storage capacity. All-bolted unitized construction with no welds to fatigue, full flow swivel and heavy gauge steel frame, spool and drum ensure longest service life. Series 30000’s vibration-proof, self-locking fasteners are ideal for industrial or field use such as turf care or pest control.

• Hose replacement made easy – the goose neck can easily be removed to simplify adding long lengths of hose to the reel.
• Full flow stress free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life.
• Quality finish and corrosion resistant – Individually powder coated components offer the maximum protection from premature corrosion.
• Motor options – Multiple motor options provide an easy method to rewind long lengths of hose.
• Hose I.D.: 1/4″, 3/8″, 1/2″, 3/4″, 1″
• Hose length: Up to 1000ft

Reelcraft’s stainless steel hose reels are ideal for food processing, pre-rinse, wash down, chemical transfer and industrial-solvent handling. Also suitable for coastal, offshore and on-board ship in marine applications where the harsh environment of salt water spray requires the use of stainless hose reels. Swivel include Viton O-rings. Note: Standard latch parts are made from aluminum. Series 80000 and D80000 stainless reels have an aluminum fluid path. Stainless latch parts and fluid path are available as a standard option by placing a -S at the end of the part number. Example: OLS-S

• Reinforced steel – The steel guide arm and dual pedestal base are stamped with ribs and gussets and robotically welded to insure maximum strength and lightest possible weight. The unitized cast fluid path and ratchet reduce wearable parts and ease of assembly.
• Full flow stress free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life.
• Long life drive spring – The unitized cast aluminum fluid path with built in declutching arbor virtually eliminates possibility of leakage and spring damage due to reverse winding. Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
• Quality finish and corrosions resistant – Stainless steel components offer the maximum protection from premature corrosion.
• Hose I.D.: 3/8″, 1/2″, 3/4″,  1″
• Longest hose lengths up to: 300ft

Reelcraft’s stainless steel hose reels are ideal for food processing, pre-rinse, wash down, chemical transfer and industrial-solvent handling. Also suitable for coastal, offshore and on-board ship in marine applications where the harsh environment of salt water spray requires the use of stainless hose reels. Swivel include Viton O-rings. Note: Standard latch parts are made from aluminum. Series 80000 and D80000 stainless reels have an aluminum fluid path.

• Reinforced steel – The stainless steel guide arm and base are stamped with ribs and gussets to insure maximum strength and lightest possible weight.
• Full flow stress free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life. The hose is plumbed into the base to eliminate the risk of undue stress on the swivel.
• Long life drive spring – Declutching arbor virtually eliminates possibility of spring damage due to reverse winding. Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
• Quiet speed latch – The latch cam is designed for reliable quiet operation.

Reelcraft’s Series 80000 and D80000 spring retractable reels incorporate the most current design and manufacturing techniques to guarantee long life and trouble-free performance. All-steel construction and a baked-on powder coat finish combine to produce a rugged, corrosion-resistant product suitable for a wide variety of heavy duty applications. Series D80000 reels are also supplied with Reelcraft’s ball-bearing style swivel.

• Reinforced steel – The steel guide arm and dual pedestal base are stamped with ribs and gussets and robotically welded to insure maximum strength and lightest possible weight. The unitized cast fluid path and ratchet reduce wearable parts and ease of assembly.
• Full flow stress free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life.
• Long life drive spring – The unitized cast aluminum fluid path with built in declutching arbor virtually eliminates possibility of leakage and spring damage due to reverse winding. Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
• Quality finish and corrosion resistant – Individually powder coated components offer the maximum protection from premature corrosion.
• Hose I.D.: 3/8″, 1/2″, 3/4″,  1″
• Longest hose lengths up to: 100ft

The hydraulic series hose reel incorporates contemporary engineering and manufacturing techniques to give trouble free performance. Used for high pressure hydraulic applications, Series TH hose reels are ideal for operating hydraulic cylinders, tools and equipment. Reels are all steel construction and compact for applications with critical space requirements.

• Quality finish and corrosion resistant – Individually powder coated components offer the maximum protection from premature corrosion.
• Long life drive spring – Declutching arbor virtually eliminates possibility of spring damage due to reverse winding. Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
• Constant tension or pos-i-latch spool mechanism
• Compact design for critical space requirements
• Hose I.D.: 3/8″, 1/4″, 1/2″
• Longest hose lengths up to: 65ft

The hydraulic series hose reel incorporates contemporary engineering and manufacturing techniques to give trouble free performance. Used for medium pressure hydraulic applications, Series TH hose reels are ideal for operating hydraulic cylinders, tools and equipment. Reels are all steel construction and compact for applications with critical space requirements.

• Quality finish and corrosion resistant – Individually powder coated components offer the maximum protection from premature corrosion.
• Long life drive spring – Declutching arbor virtually eliminates possibility of spring damage due to reverse winding. Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
• Constant tension or pos-i-latch spool mechanism
• Compact design for critical space requirements
• Hose I.D.: 1/4″
• Hose Length: 25ft

Series RT is the best economical choice for a medium duty, light weight, spring-driven hose reel for applications that are less demanding, yet require a product that can withstand industrial and commercial use. The industrial-grade drive spring is protected from the environment in a polypropylene spool for longer service life. Guide arm adjusts to seven positions.

• Reinforced steel – The steel guide arm and base are stamped with ribs and gussets to insure maximum strength and lightest possible weight.
• Full flow stress free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life. The hose is plumbed into the base to eliminate the risk of undue stress on the swivel.
• Long life drive spring – Declutching arbor eliminates reverse spring winding, and torsions latch spring is virtually unbreakable. High quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
• Quality finish and corrosion resistant – Individually powder coated components along with the composite spool offers the maximum protection from premature corrosion.

• Hose I.D.: 1/4″, 3/8″, 1/2″
• Longest hose lengths up to: 50ft

Series RT is the best economical choice for a medium duty, light weight, spring-driven hose reel for applications that are less demanding, yet require a product that can withstand industrial and commercial use. The industrial-grade drive spring is protected from the environment in a polypropylene spool for longer service life. Guide arm adjusts to seven positions.

• Reinforced steel – The steel guide arm and base are stamped with ribs and gussets to insure maximum strength and lightest possible weight.
• Full flow stress free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life. The hose is plumbed into the base to eliminate the risk of undue stress on the swivel.
• Long life drive spring – Declutching arbor eliminates reverse spring winding, and torsions latch spring is virtually unbreakable. High quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
• Quality finish and corrosion resistant – Individually powder coated components along with the composite spool offers the maximum protection from premature corrosion.

• Hose I.D.: 1/4″, 3/8″, 1/2″
• Longest hose lengths up to: 50ft

Series RT is the best economical choice for a medium duty, light weight, spring-driven hose reel for applications that are less demanding, yet require a product that can withstand industrial and commercial use. The industrial-grade drive spring is protected from the environment in a polypropylene spool for longer service life. Guide arm adjusts to seven positions.

• Reinforced steel – The steel guide arm and base are stamped with ribs and gussets to insure maximum strength and lightest possible weight.
• Full flow stress free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life. The hose is plumbed into the base to eliminate the risk of undue stress on the swivel.
• Long life drive spring – Declutching arbor eliminates reverse spring winding, and torsions latch spring is virtually unbreakable. High quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
• Quality finish and corrosion resistant – Individually powder coated components along with the composite spool offers the maximum protection from premature corrosion.

• Hose I.D.: 1/4″, 3/8″, 1/2″
• Longest hose lengths up to: 50ft

Able to fit:
Cable width in mm: 3mm – 15mm
Cable length in feet: 59ft – 1840ft

SHO/TMR Series Reels are designed to provide a low cost solution for long electrical cable horizontal retrieve applications. A horizontal retrieve application is when the reel is mounted on the moving equipment and winds or pays-out cable into a tray or other support.

In the SHO series reels, winding torque is provided by one or more parallel design spring motors. The TMR Series Reels utilize a small toque motor/gear reducer to drive the spool. Both SHO and TMR Series Reels are available with either random wrap or monospiral wrap spools.

Gleason SHO/TMR reels have retrieve capacities of 350 feet of electric cable at a velocity of 150 ft./min and acceleration of 1.0ft./sec/sec.

All Steel Construction

Unitized self-contained slip-ring assemblies

Positive spool lock for safe, easy cable replacement without removing reel from its mounting

Heavy duty chain drive with tension adjustment

Dust-tight, watertight chain cases with gasketed and oil bath lubrication

The Gleason VARI-MATIC drive provides a reliable solution to the challenge of retrieving and unwinding long lengths of valuable cable at the demanding cycle rates of today’s advanced machinery. Vari-Matic Reels are available with level-wind or monospiral spools.

Level Wind reels provide best management of long cables and have demonstrated through years of use to be the safest and most reliable way to handle long lengths of large cable. By winding a single layer of cable horizontally on a generous drum diameter, the cable experiences minimum flexing and is exposed to maximum cooling, should that be a concern. Equipment speeds can be slow, moderate or high with equally good performance.

Monospiral reels provide best low reel mounting and are designed to stack cable in a single, multiple layer vertical configuration. They are the solution to applications involving large cables where lateral space may be limited. This narrow spool design, together with proven VARI-MATIC drive reliability, makes monospiral reels ideal for service in any demanding environment. Monospiral reels are available for low, medium or high speed requirements. The monospiral design allows the reel itself to act as a cable guide.

Hubbell’s redesigned ACA Industrial and Industrial Weatherproof Cord Reels enhance user safety and maximize efficiency by managing cord and power in a safe and organized manner, while also meeting the demands of tough industrial environments.

ACA Industrial and Industrial Weatherproof Cord Reels are listed to UL 355 and CSA, C22.2 No. 308 with a durable, lightweight low profile cast aluminum construction.

• Durable, corrosion resistant cast aluminum construction.
• Yellow or white powder coat finish.
• Movable guide arm can be mounted in two positions.
• Positive latch mechanism automatically maintains desired cord length.
• Ratchet lock can be disengaged in field for constant tension applications
• 16-10AWG, 3 & 4 conductor cord for greater current carrying capacity.
• 10AWG fully rated at 30 amps.

Available in 25ft, 35ft and 45ft lengths. The ACA reel is available in NEMA4, white color, or yellow.

ACA reels also feature an improved mounting plate that allows customers to upgrade existing installations or use. Hubbell’s innovative mounting bracket for a quick, easy installation on any surface.

Reelcraft’s light duty cord reels are for less strenuous applications in which a capable and long-lasting reel is required. The compact Series LD is designed for overhead mounting and feature a powder coated steel housing, adjustable cable stop and a resettable circuit breaker.

• Designed for overhead mounting.
• Very compact design
• Powder coated steel body
• Includes adjustable cable stop and a resettable circuit breaker
• Comes in bare cable or choose custom attachments (LED or power socket)

Spring Driven CAT6 cord reels for ethernet and high definition video applications.

Features:

• Equipped with special gold-on-gold slip ring. Provides ethernet communication with very electrical low noise for unparalleled performance.
• 50ft length with 4ft input pigtail
• 1000 baseT (Gigabyte Ethernet) compatible
• Plug and play
• RJ45 plugs on both input and output ends
• Ratchet locking mechanism and ball stop

Great solution for schools, offices, factories ethernet solutions.

with 3 waterproof earthed sockets,
with 50m extension cable H07RN-F 3X1,5 SW

CE Certified

(GT 310.WS3.50KS315)

Able to fit:
Cable width in mm: 3mm – 15mm
Cable length in feet: 62ft – 2467 ft

Stackable.

Able to fit:
Cable width in mm: 3mm – 15mm
Cable length in feet: 137ft – 4156 ft

Able to fit:
Cable width in mm: 3mm – 15mm
Cable length in feet: 137ft – 4156 ft

Professional stage cable drum with continuous front panel.
Stacks with SK 4731 / SK 4823

Able to fit:
Cable width in mm: 3mm – 15mm
Cable length in feet: 682ft – 17125 ft

Nominal voltage: 230V~/16A
Power wired cable: 1000W
Power unreeled cable: 3600W

Built tough to provide dependable Mill Duty service under adverse conditions. Specially designed to operate reliably and safely, MMD reels feature “beefed-up” all steel construction, oversized bearings on both sides of the load bearing spool, and a heavy duty shaft.

Four spool diameters, a wide variety of drum diameters and either direct or geared drive allow maximum flexibility in specifying the right reel for your application. There are models for 2 to 36 conductors, cable length from 30′ to 200′. May also be used for crane magnet applications.

2-pole + E, 16A, 250V
Protection type: IP 44 (spray water protected)

With self-closing hinged lids. Optionally also available with voltage display. Notice: A H07-cable is necessary for outside use and in moist facilities.

Optional:
1) 82 ft cable
2)164 ft cable

1. Closed cover
2. Sockets
3. Auxillary Spool

Able to fit:
Cable width in mm: 3mm – 15mm
Cable length in feet: 39ft – 5613ft

GT series cable reel not only deliver a practical solution where continuous mobility is required – they also protect the cable. With their high service life expectancy and easy handling, these cable reels are ideal for outside broadcasting applications, radio broadcasts or for sports and other events.

Special rubber cable drum with blank cover for self-tooling.

Options to come with:

1. Sockets, FI circuit breaker, automatic fuse and heat protection.
2. Auxiliary spool with 4 hooks, with hole in the core 60mm
3. Auxiliary spool for storing and safely transporting all types of lines and wires, with lockable door (2 hinges), with hole (diameter 51mm)

Able to fit:
Cable width in mm: 3mm – 15mm
Cable length in feet: 42ft – 2598 ft

Reelcraft’s static discharge reels are used to ground equipment operating in hazardous atmospheres. When properly clamped to the ground, the static discharge reel dissipates static electrical buildup, reducing the chances of sparking and the potential for explosion. *Nylon covered cable (1/8″ O.D.).

• Strength – Made from industrial grade carbon steel.
• Compact design – Reels require little mounting space for applications where space is a critical requirement.
• Corrosion resistance – Steel components are powder coated for superior corrosion resistance. Steel cable available with nylon coating for longer service life.
• Easily adjust spring tension – Loosening two screws allows user to add or remove spring tension.

Direct replacement for existing low profile reels with up to 100′ of cable. For magnet or hook/rotate applications.

• Externally mounted springs can be easily adjusted or replaced
• Parallel spring design provides greater application flexibility. Winding tension is tailored to your needs by increasing or decreasing number of springs and by easy spring adjustment
• Standard 35, 75, 125 or 200 amp collectors used

SHO/TMR Series Reels are designed to provide a low cost solution for long electrical cable horizontal retrieve applications. A horizontal retrieve application is when the reel is mounted on the moving equipment and winds or pays-out cable into a tray or other support.

In the SHO series reels, winding torque is provided by one or more parallel design spring motors. The TMR Series Reels utilize a small toque motor/gear reducer to drive the spool.

Both SHO and TMR Series Reels are available with either random wrap or monospiral wrap spools. Gleason SHO/TMR reels have retrieve capacities of 350 feet of electric cable at a velocity of 150 ft./min and acceleration of 1.0ft./sec.

For more information on this reel, kindly email us to enquire.

“SZ” Hazardous Duty Cable Reels have all the features of an “S” Reel plus an extra heavy slip ring enclosure and pre-wired/pre-potted junction box. Designed for use in Class I (groups C & D) and Class II (groups E, F & G, division 1 & 2) hazardous environments, the direct or gear spring drive reels are available with 16″ to 32″ diameter spools.

The pre-wired and pre-potted NEMA 7-9 junction box saves time during installation because the electrical connections are made in the box, not directly on the slip ring. Slip rings are available for four to 36 circuits, 35 to 200 amp.

• Rugged welded steel frame is built to last.
• One-piece slip ring assembly can be removed as a unit. Fast, easy slip ringbrush replacement.
• High-quality Safetychange® self contained spring motor.
• Optional Cable Guides with Rollers, Hoop Guides and Cable Stops available.
• Machine mountable.
• Sizes to accommodate wide range of cable sizes and lengths.

Gleason Cable-Master Reels give you more for your money because they are ruggedly built and their design has been refined over many years of field use. They have either fully automatic or ratchet controlled spring rewind and contain all the features found in any reel in this size range.

Standard features include: cable guide with four rollers, ratchet lock and 600 volt slip ring. Available for 3 to 12 conductors, 20′ to 70′ long cables.

• Weather-Tight Design
• Wide range of compatibilites
• Simplified selection;Baked Orange Polyester Finish

• Material: High Quality Polyamide 6
• IP 68 acc. EN 60529
• Temp range:  -40°C to +105°C
• Self extinguishing:  UL94-HB, Halogen-Free
• Application: Machine tool, Shipbuilding, Tramway Industrial / Automatic Machinery, Printing Machine, Plant, Construction Crane and Heavy Machine etc.

Application for Robots (Welding robot)

• Material: High Quality Polyamide 11/12
• IP 68
• Temp range:  -50℃ to +95℃
• Self extinguishing: UL94-V2, Halogen-Free

Application for Robots (Material handling machine, Rotating machinery)

• Material: High Quality Polyamide 12
• IP 68
• Temp range: -50°C to +95°C
• Self extinguishing: UL94-V2, Halogen-Free

All kind of connectors with diverse thread size available such as G, M, Pg, NPT, UNEF.

• Easy to assemble & dissemble.
• Material: High Quality Polyamide 6
• IP 68 (EN 60529)
• Temp range: -40℃ to +105℃
• Self extinguishing: UL94-HB / Free of Halogen Phosphorous and cadmium

Contact us for full range of connectors!

Festoon Kit C-Rail.

• Zinc–plated steel with yellow dichromate dip finish
• Wheels smooth–running ball bearing
• Axles Zinc–plated steel

Heavy Duty I-Beam Supported Festoon Systems are designed for high speed. High load applications. Maximum speeds, depending on model, range from 350 to 800 feet per minute with maximum loads from 250 to 1,100 lbs. per trolley.

For more information on festoon systems, kindly email us to enquire.

I-Beam Festoon incorporates economically priced yet rugged trolleys for lighter systems. Max capacity 300 lbs. per trolley at 400 fpm.

For more information on festoon systems, kindly email us to enquire.

Parts slide together, lock automatically and the trolley is ready to roll. No fasteners to drop or lose. Removal or replacement is just as easy.
Pre-engineered kits take the mystery out of festooning. Each kit includes everything you need. Just add cable or hose. Also available with tool hanger.

Contact us now to know more!

1. Type “E” – Cable/hose carriers with rugged steel side chains and aluminum or steel carrier bars are ideal for harsh environments and high speed operation. Unique nylon disks placed between the links reduce friction and operating noise. Links are high-strength, low-alloy steel and employ a 2:2 double link design for maximum strength. Type “E” PowerTrak is available with inside openings from 0.75″ x 3.75 to 8.00″ x 23.28″ with a maximum cable/hose size of 7.73″ o.d. Total travel of 146 feet is possible when optional roller supports are used. Speeds to 500 fpm are possible.
2. Type “EF” – PowerTrak Drag Chains are designed with the most demanding industrial applications and harsh environments in mind, including Offshore and Land Based rigs. There are track sizes to handle cables as large as 7.73″ in diameter.

For more information on PowerTrak®, kindly email us to enquire.

Heavy duty molded nylon side chains on the versatile PowerTrak provide quiet operation and eliminate the need for periodic lubrication. The unique links, separated by steel cable/hose carriers, do not corrode, are non-conductive, resist abrasion and slide more easily than steel side links. If desired, twist-out aluminum bars allow easy cable/hose installation. A wide variety of cable/hose carrier designs are available.

Type “G” PowerTrak is available with inside opening from 0.75″ x 4.00″ to 3.09″ x 18.00″. Maximum cable/hose OD 2.81″. A maximum total travel of 800 feet is possible when optional guide tray and carriage is used.

For more information on PowerTrak®, kindly email us to enquire.

Light weight and corrosion resistant, type “GRP” PowerTrak is ideal for carrying control cables, cords, individual wires and tubes. Molded from fiber-reinforced virgin nylon, one piece links easily snap together to customize length. Material is highly wear-resistant, self-lubricating, and is not damaged by salt or hard water, lubricating oils and greases or hydrocarbons such as conventional fuels.

Type “GRP” PowerTrak is available with inside openings from 0.75″ x 0.59″ to 2.55″ x 8.00″ for cables or hoses with a maximum outside diameter of 2.12″. Maximum total travel is 300 feet when optional guide tray is used. Most track sizes have flip open tops for easy access to cables, cords and hoses.

For more information on PowerTrak®, kindly email us to enquire.

Enclosed conduit cable and hose carrier for machine tools, robots and material handling equipment. Modular design allows shortening or lengthening PowerFlex. Polished stainless steel outer shell and smooth, self-lubricating fiber-reinforced Nylon inner liner provides ultimate protection to cables and hoses and promotes long conduit life, even in harsh environments. Sizes to handle cable to 2.36″ diameter.

For more information on PowerFlex™, kindly email us to enquire.

Applied to clean room for LCD / PDP and Semiconductor production Line requested Dust Requlation CLASS10, furthermore to Automation Machine Tool and Industrial Machinery needed high speed operation.

For Robot, Rotation Machine.

Spiral motion up to 360°

With a friction co-efficiency of 0.02 ~0.07μ due to the patented roller skid design, the Shift Chain is quieter and faster than ever. Non friction also means no dust for those applications where a clean work environment is a priority.

• Material: CPS-amide, UL94-HB
• Internal Width (mm): 35 – 600
• Internal Height (mm): 26 – 110
• Bending Radius (mm): 70 – 605

With a friction co-efficiency of 0.02 ~0.07μ due to the patented roller skid design, the Shift Chain is quieter and faster than ever. Non friction also means no dust for those applications where a clean work environment is a priority.

Shift Chain ERS-Type can be found on car manufacturer’s welding line, where excess material can damage your inserted cables.

• Material: CPS-amide, UL94-HB
• Internal width (mm): 35 – 400
• Internal height (mm): 24.5 – 110
• Bending Radius (mm): 70 – 605

By applying rollers to the ST-S type, rolling motion between the upper and lower rollers is applied to minimise frictional force caused by skid interference. It is suitable for equipment that travels long distance because of heavy load of cable entry due to roller application.

Application for facilities and equipment requiring a long travel distance as below: Gantry Robots, Robot Carriages, Automatic Welding Lines, Gantry Cranes, Gantry loader, etc.

Shift Chain ES-Type can be found on car manufacturer’s welding line, where excess material can damage your inserted cables.

• Material: CPS-amide, UL94-HB
• Internal width (mm): 35 – 300
• Internal height (mm): 26 – 76
• Bending Radius (mm): 70 – 500

• Material: CPS-amide, UL94-HB

  Internal width: 6mm – 77mm
  Internal height: 10mm – 23mm
  Bending radius: 18mm – 120mm

Internal width: 35mm – 400mm
Internal height: 24.5mm – 110mm
Bending radius: 70mm – 605mm

Internal width: 35mm – 600mm
Internal height: 26mm – 110mm
Bending radius: 50mm – 600mm

By attaching a skid to the friction part of the chain and applying the friction drive method of the upper and lower skids, noise and friction can be minimised, suitable for long-distance driving equipment. Can be used in various other environments .

Application: For facilities and equipment requiring a long travel distance as below:

Gantry Robots, Robot Carriages, Automatic Welding Lines, Gantry Cranes, Gantry loader etc. After using skid for a long time, it can be replaced without extra components.

• Material: CPS-amide, UL94-HB
• Internal width (mm): 35 – 600
• Internal height (mm): 26 – 78
• Bending Radius (mm): 70 – 500